Research-Grade High-Precision Microscope Slides(Including Coverslips)

Description

I. Product Overview

1.1 Product Positioning

1.2 Core Values

• High-precision optical performance: Transmittance > 92% ensures unattenuated transmission of optical signals, meeting the requirements for high-precision imaging such as confocal and fluorescence microscopy.
• Multi-scenario adaptability: Offers two types of microscope slides (smooth surface and frosted surface) and coverslips in multiple specifications to cover diverse sample loading and observation needs.
• Stable and durable characteristics: Made of high-purity glass substrates with stable physical properties, resistant to corrosion by common chemical reagents, suitable for long-term experimental use.

II. Product Series & Detailed Specifications

2.1 Microscope Slide Series (4 Core Models)

2.2 Coverslip Series (4 Common Specifications)

2.3 Key Performance Indicators

III. Application Scenarios & Industry Solutions

3.1 Core Application Fields

3.2 Typical Application Cases

1. Cell Fluorescence Imaging Experiment: Microscope Slide 7101 (smooth surface) is used to carry cell samples, paired with 20mm×20mm coverslips for coverage. Transmittance > 92% ensures unattenuated fluorescence signals, and high surface flatness prevents blurred cell imaging, helping researchers obtain clear images of cell structures and fluorescence distribution.
2. Polarization Modulation Experiment: Microscope Slide 7110 (imperial fully frosted) is adopted for optical platform construction. Standardized dimensions match components such as polarizers and lasers, and low light loss characteristics guarantee polarization control precision, meeting the rigorous requirements of laser optical research.
3. Educational Experiment Scenario: Universal smooth microscope slides combined with 18mm×18mm coverslips are cost-effective for batch student operations. The smooth surface design allows easy cleaning and reuse, helping students master basic microscopic observation skills.

IV. Operation & Maintenance Specifications

4.1 Standardized Operation Procedures

1. Product Cleaning (Mandatory Pre-Use Step)

• Routine Cleaning: Gently wipe both sides of the microscope slide/coverslip with lens tissue or chamois to remove surface dust and fingerprints.
• Deep Cleaning: For oil stains or stubborn dirt, dip a lint-free cloth in a small amount of anhydrous ethanol (or ethanol-ether mixture, 1:1 ratio) and wipe in a single direction to avoid scratches from back-and-forth rubbing.
• Post-Cleaning Inspection: Observe under natural light after cleaning to confirm no residual dirt or scratches, preventing impact on observation results.

2. Sample Preparation & Coverslip Placement (Core Operation Steps)

1. Sample Placement: Evenly spread liquid samples or sectioned samples on the center of the smooth surface of the microscope slide. Control sample thickness between 0.1-0.5mm (to avoid improper coverslip fitting due to excessive thickness).
2. Coverslip Handling: Hold one edge of the coverslip with tweezers and gently touch the edge of the sample droplet at a 45° angle with the other edge.
3. Slow Coverage: Lower the coverslip slowly at a constant speed, allowing the liquid to spread naturally under surface tension and expel air bubbles. For a small number of bubbles, lightly press the edge of the coverslip to assist bubble removal.
4. Excess Liquid Treatment: If liquid overflows, gently absorb it with absorbent paper (avoid forceful wiping to prevent coverslip displacement).

4.2 Maintenance & Storage Specifications

Quick Product Selection Guide