Specialty, Packaging & Emerging Materials – ATOMFAIR

Atomfair Butyl Sealant

Zhujun Wang — Thu, 04 Sep 2025 07:16:51 +0000

Single-component hot melt butyl sealant specifically formulated for photovoltaic applications, providing superior moisture barrier protection and electrical insulation for solar cell edge sealing.

Technical Specification	Value
Base Material	High-purity butyl polymer compound
Formulation Type	Single-component, hot-applied
Cross-Section Dimensions	0.74 mm × 5 mm (width × height)
Standard Roll Length	55 linear meters
Water Vapor Transmission Rate	<0.5 g/m2/24h @ 38°C

Application Instructions

Prepare surfaces by cleaning with isopropyl alcohol and ensuring complete dryness
Heat sealant to application temperature range of 110°C to 140°C
Apply using temperature-controlled dispensing equipment
Apply firm, even pressure during bonding process
Allow to cool completely before handling

For technical specifications or bulk inquiries, please contact our materials specialists at inquiry@atomfair.com

Research Use Notice: This product is intended for laboratory research and prototype development in photovoltaic applications.

Atomfair HelioSeal TF Butyl Sealant

Zhujun Wang — Thu, 04 Sep 2025 07:16:51 +0000

Premium single-component hot melt butyl sealant engineered for photovoltaic applications, offering exceptional moisture barrier properties and electrical insulation for solar cell encapsulation. This high-performance sealant ensures long-term protection against environmental degradation.

Technical Specification	Value
Base Polymer	Modified butyl rubber compound
Form	Single-component hot melt
Cross-Section	0.74 × 5 mm (W × H)
Roll Dimensions	55 m length × 200 mm core
Water Vapor Transmission	<0.1 g/m2/day
Service Temperature	-40°C to +90°C

Application Protocol

Prepare surfaces by cleaning with isopropyl alcohol and ensuring complete dryness
Maintain application temperature between 110°C and 140°C (optimal range)
Use precision dispensing equipment with pressure control (recommended 2-4 bar)
Apply continuous bead with uniform thickness (0.5-1.0 mm recommended)
Complete bonding within 30 seconds of application for optimal adhesion

For technical datasheets or application support, contact our materials specialists at inquiry@atomfair.com

Research Application Note: This advanced sealing material is formulated for photovoltaic research and prototype development. Performance characteristics may vary in production-scale applications.

Atomfair Cleaning Agent

Zhujun Wang — Thu, 04 Sep 2025 07:16:50 +0000

High-performance cleaning solutions for laboratory use. Compatible with various glass types and sizes, ensuring optimal cleaning results.

Note: Specific technical parameters for cleaning agents were not provided in the source material. Please contact manufacturer for detailed specifications.

If you are interested or have any questions, please contact us at inquiry@atomfair.com

Disclaimer: Sold exclusively for laboratory research.

Atomfair UV Curing Adhesive E040

Zhujun Wang — Thu, 04 Sep 2025 07:16:50 +0000

Single-component epoxy-based UV/visible light curing adhesive with high hardness, flex resistance, and excellent weather resistance. Designed for smart card chip encapsulation applications.

E040 is a solvent-free modified epoxy resin formulation that provides superior performance in demanding applications.

If you are interested or have any questions, please contact us at inquiry@atomfair.com

Disclaimer: Sold exclusively for laboratory research.

Atomfair UV LED Curing Machine XM210

Zhujun Wang — Thu, 04 Sep 2025 07:16:50 +0000

UV LED curing system with 365nm/395nm/405nm wavelengths and 100*100mm illumination area. Ideal for adhesive curing, material photoreactions, and electronic assembly.

Parameter	Specification
Wavelengths	365nm/395nm/405nm
Illumination Area	100*100mm
Peak Intensity	1400~2000mw/cm
Applications	Adhesive curing, material photoreactions, electronic assembly, optical bonding, ink curing

If you are interested or have any questions, please contact us at inquiry@atomfair.com

Disclaimer: Sold exclusively for laboratory research.

Atomfair Photomask

Zhujun Wang — Thu, 04 Sep 2025 07:16:49 +0000

Research-grade photomasks with ultra-high resolution capabilities for laboratory applications. Our precision photomasks support advanced microfabrication with exceptional pattern fidelity down to 15μm feature sizes.

Technical Specification	Performance Value
Minimum Resolvable Feature	15μm (0.015mm)
Minimum Aperture Size	20μm (0.020mm)
Pattern Placement Accuracy	±1μm
Substrate Options	Soda-lime glass, Quartz
Custom Design Service	3-5 business day turnaround

Design Specifications

Accepts GDSII, DXF, and DWG file formats
Minimum feature spacing: 10μm
Maximum design area: 150×150mm

For custom photomask design consultation or technical support, contact our lithography specialists at inquiry@atomfair.com

Research Application Note: These high-precision photomasks are manufactured for research purposes in micro/nanofabrication and MEMS development. Not intended for industrial production use.

Single-Crystal Lithium Tantalate Thin Films

Zhujun Wang — Thu, 12 Jun 2025 03:41:00 +0000

Single-Crystal Lithium Niobate Thin Films

Zhujun Wang — Thu, 12 Jun 2025 03:29:00 +0000

5.0mol%MgO – doped Lithium Niobate

Zhujun Wang — Thu, 08 May 2025 08:05:56 +0000

Product Introduction

We can grow high – quality, large – diameter MgO:CLN single – crystals by using precisely mixed ingredients, a low growth rate, a suitable temperature gradient, and high – purity raw materials.

Features

Excellent Nonlinear Optical Coefficients: Demonstrates outstanding performance in nonlinear optical applications, enabling efficient nonlinear optical conversion.
Low Reverse Voltage: Helps reduce the voltage requirements during device operation, improving energy efficiency.
Low Pyroelectrical Coefficients: Minimizes electrical signal interference caused by temperature changes, enhancing device stability.

Applications

Quasi – phase matching SHG and OPO: Plays a crucial role in laser frequency conversion and related fields.
THZ Applications: Can be used in technologies such as THZ wave generation and detection.
Ferroelectric Storage: Due to its ferroelectric properties, it is suitable for data storage and other applications.

Technical Specifications

Parameter	Details
Orientation	X, Y, Z – cut
Diameter	3, 4, 6 inches
Orientation Flat (OF) Length	22mm, 32mm, 47mm
Thickness(mm)	0.35, 0.5, 1.0, 2.0, 3.0
Surface Finish	Double sides polished, S/D20/10, Ra≤0.3nm
TTV	≤5μm
WARP	≤30μm
Index of refraction	No = 2.2827±0.0003 Ne = 2.1928±0.0003 Measured by prism coupler method @632.8nm
Edge	Rounded by beveling
Laser damage threshold	100mJ @ 1064nm/10ns/20Hz
Internal quality	Free of stripe/inclusion etc.
Curie temperature	1215±3°C

Quality Assurance

We conduct strict quality inspections on each 5.0mol%MgO – doped Lithium Niobate crystal to ensure it meets high – standard technical parameter requirements, providing you with reliable products.

Packaging and Shipping

Our products are carefully packaged with professional packaging materials to prevent damage during transportation. We offer fast and secure shipping services to ensure the products reach you intact and on time.

If you have any questions or requirements regarding 5.0mol%MgO – doped Lithium Niobate crystals, please feel free to contact our customer service team.

Electro-Optic grade Congruent Lithium Niobate Crystal

Zhujun Wang — Thu, 08 May 2025 07:57:10 +0000

Product Introduction

Our Electro – Optic grade Congruent Lithium Niobate Crystal is a high – quality optical material. Through innovative ADC technology, dynamic temperature field regulation for single – crystal growth, and raw material purification, we are able to offer LN single – crystal ingots and polished wafers with consistent components, free of stripes, and low stress in batches.

Features

Excellent Electro – optic Coefficients: Enables efficient electro – optic conversion, making it ideal for applications requiring precise optical control.
Large Degree of Birefringence: Facilitates the separation and manipulation of light polarization states, crucial for many optical devices.
Lower Stress: Reduces internal mechanical stress within the crystal, enhancing its structural stability and optical performance over time.
Lower Optical Loss: Minimizes the attenuation of light passing through the crystal, ensuring high – quality light transmission for optical signals.

Applications

EO Modulator: Widely used in optical communication systems to modulate optical signals, enabling high – speed data transmission.
Low – pass Filter: Helps in filtering out high – frequency noise in optical signals, ensuring signal integrity.
Optical Polarizer: Used to control the polarization of light, which is essential in many optical experiments and devices.

Technical Specifications

Parameter	Details
Orientation	X, Y, Z, Y36° – cut
Diameter	76.2mm, 100mm, 150mm, 200mm
Orientation Flat (OF) Length	22mm±2mm, 32mm±2mm, 47mm±2mm
Second Refer. Flat (RF) Length	10mm±3mm
Thickness(mm)	0.35, 0.50, 1.0
Surface Finish	Double sides polished, S/D20/10, Ra≤0.3nm
TTV	≤10μm
WARP	≤50μm
Index of refraction	No = 2.2878±0.0001 Ne = 2.2028±0.0001 Measured by prism coupler method @632.8nm
Edge	Rounded by beveling
Curie temperature	1142±1°C
Internal quality	Free of stripe/inclusion etc.

Quality Assurance

Our products undergo strict quality control processes. Each Lithium Niobate Crystal is carefully inspected to ensure it meets the high – standard specifications mentioned above. We are committed to providing reliable and consistent products for our customers.

Packaging and Shipping

The crystals are packaged with utmost care to prevent any damage during transportation. We offer fast and secure shipping options to ensure your product reaches you in perfect condition.

If you have any questions or need further information about our Electro – Optic grade Congruent Lithium Niobate Crystal, please feel free to contact our customer service team.